How and How Long:
- Turn off the power to the ceiling fan to avoid risk of electric shock. Position stepladder beneath the fan in a place that will allow access to the top of the fan. If you plan to paint the fan blades and motor housing unit, unscrew fan from ceiling. It is usually helpful to have another person help you detach the fan.
- It is easiest to paint the fan blades if they are separated from the motor housing unit. Remove the fan blades with a screwdriver and place on a work area covered with a drop cloth.
- Clean fan components to remove any dirt or oil. Lightly sand shiny or glossy surfaces and remove sanding residue with a tack cloth. This will allow paint to better adhere. Mask any areas you do not want to spray with tape and newspaper.
- Following the instructions on the can, apply the primer first. Prime the blades one side at a time, allowing to dry to the touch before painting the other side. Apply several light coats versus one heavy coat to avoid runs or drips. If runs do occur, sand smooth and reapply primer. Let dry.
- Following the instructions on the can, spray several light coats of Krylon Indoor/Outdoor paint. Paint the blades one side at a time following the same pattern as you did with the primer. For a more clean and even finish, apply paint in a single direction rather than in a back and forth motion.
- Reassemble the fan after all pieces are completely dry. It is usually best to wait at least 1 hour.
- Turn on power to ceiling fan.
Approximate project time: 2 hours.
|
